Mounted point manufacture and abrasive RFQ supportKhurja, Uttar Pradesh, IndiaGST 09APXPM7548B1ZA
Product family
Sadhvi Udyog discusses custom abrasive specifications for mounted points, oil stones, abrasive sticks and application-led abrasive tools based on shape, size, grain, grit, bond, machine RPM, material and quantity.
RFQ reference focus
Custom abrasive enquiries usually start when a standard shape or size does not fully match the access area, material, removal target or repeat production need. The specification should be reviewed before committing to tooling, quantity and dispatch timelines.
Application-led review before custom quotation
Shape, size, shank, grain, grit, grade and bond discussion
Material, machine RPM and finish target captured in the RFQ
Feasibility, minimum quantity and lead time confirmed case by case
Repeat-order notes created after a successful trial or supply
Common applications
Non-standard mounted point shapes
Oil stone and abrasive stick RFQs
Custom oil stone and abrasive stick dimensions
Repeat production abrasive references
Special access grinding and deburring
Toolroom and maintenance support
Foundry, fabrication and component finishing
Selection notes
Catalogue references
Cylinder Type
Typical body: ⌀3-10 × 6-20 mm
Representative compact cylindrical mounted points for internal grinding and deburring of bores, slots and weld beads on compatible die grinders or flexible-shaft machines.
Large Cylinder Type
Typical body: ⌀20-25 × 20-50 mm
Representative large cylindrical mounted points for heavy stock removal, face grinding and surface finishing in foundries and fabrication shops.
Bullet Type
Typical body: ⌀10-16 × 16-25 mm
Representative bullet-profile mounted points with rounded ends for blending radii on dies, weld toes and casting fillets.
Small Cylinder (3 mm Shank)
Typical body: ⌀3-6 × 3-13 mm
Representative fine cylindrical mounted points on compact shanks for restricted-access precision finishing.
Round-Nose Cylinder
Typical body: ⌀3-13 × 10-25 mm
Representative round-nose cylindrical mounted points for contour blending and die or mold finishing without a sharp corner contact.
Slim Cone Type
Typical body: ⌀6-10 × 20-32 mm
Slim conical mounted point for chamfers, countersinks, internal corners, and narrow access areas where a cylindrical point cannot reach the feature cleanly.
Technical comparison
| Reference | Size | Fit | Abrasive | Grit | Typical use |
|---|---|---|---|---|---|
| Mounted Point - Compact Cylinder | Typical body: ⌀3-10 × 6-20 mm | ⌀3 mm or ⌀6 mm quoted variant | Aluminum Oxide (A) / White AO (WA) | 46, 60, 80, 120, 180 | Internal bore grinding, Deburring weld seams |
| Mounted Point - Large Cylinder | Typical body: ⌀20-25 × 20-50 mm | ⌀6 mm × 40 mm | Aluminum Oxide (A) / Silicon Carbide (C) | 24, 36, 46, 60, 80 | Heavy stock removal, Face grinding |
| Mounted Point - Bullet Profile | Typical body: ⌀10-16 × 16-25 mm | ⌀6 mm × 40 mm | Aluminum Oxide (A) | 46, 60, 80, 120 | Weld toe blending, Fillet radius dressing |
| Mounted Point - Fine Cylinder | Typical body: ⌀3-6 × 3-13 mm | ⌀3 mm × 35 mm | Aluminum Oxide (A) / White AO (WA) | 120, 180, 220, 320 | Restricted-access finishing, Fine deburring |
| Mounted Point - Round-Nose Cylinder | Typical body: ⌀3-13 × 10-25 mm | ⌀6 mm × 40 mm | Aluminum Oxide (A) / Pink AO (PA) | 60, 80, 120, 180 | Contour blending, Die polishing |
| Mounted Point - Slim Cone | Typical body: ⌀6-10 × 20-32 mm | ⌀6 mm × 40 mm | Aluminum Oxide (A) / Silicon Carbide (C) | 46, 60, 80, 120 | Counter-sink finishing, Chamfer deburring |
RFQ ready
Sadhvi Udyog can review the required abrasive family and quote the suitable product reference or custom specification.
