Mounted point manufacture and abrasive RFQ supportKhurja, Uttar Pradesh, IndiaGST 09APXPM7548B1ZA
info@sadhviudyog.comProduct finder
Start with the industry, narrow by product family, then search by shape or application before opening the spec sheet or sending an RFQ.
Manufacturer
Khurja, Uttar Pradesh, India
GST
09APXPM7548B1ZA
RFQ basis
Shape, grit, RPM, quantity
Product families
Mounted Points
Sadhvi Udyog manufactures mounted abrasive points for die grinders, flexible shafts, deburring, die and mold finishing, bore cleanup and toolroom support.
Grinding Wheels
Sadhvi Udyog lists grinding wheel references for bench, surface, cylindrical, internal, cup, depressed-centre and cut-off grinding RFQs.
Custom Abrasive Tools
Sadhvi Udyog discusses custom abrasive specifications for mounted points, oil stones, abrasive sticks, grinding wheel references and application-led abrasive tools based on shape, size, grain, grit, bond, machine RPM, material and quantity.
Die and mold
Mounted points for radii blending, cavity finishing, slot cleanup and edge breaking.
Foundry and fabrication
Coarser wheels and mounted points for casting flash, weld seams and heavy burr removal.
Auto components
Repeatable abrasive choices for deburring, toolroom maintenance and fixture cleanup.
Toolroom and maintenance
Bench wheels, internal wheels and small mounted points for daily grinding support.
Browse by operation
Cut-off and slotting
Thin wheels and cut-off references for separating, trimming and fabrication work.
Heavy stock removal
Larger mounted points and grinding wheels for flash, burr, weld and edge cleanup.
Deburring and edge breaking
Mounted points for machined components, bores, slots and restricted-access edges.
Blending and finishing
A-series, B-series and W-series mounted points for contours, cavities and radii.
Toolroom grinding
Bench, internal, cup and surface wheel references for repair and support work.
Browse by industry
Showing 19 of 19 products
⌀6 × 13 mm
W163 cylindrical shape reference with a compact ⌀6 × 13 mm abrasive body. Used for internal grinding and deburring of bores, slots and weld beads on compatible die grinders or flexible-shaft machines.
Fit
⌀3 mm or ⌀6 mm quoted variant
Grit
46, 60, 80, 120, 180
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀25 × 25 mm
W222 large cylindrical shape reference with a ⌀25 × 25 mm body on a 6 mm shank. Used for heavy stock removal, face grinding and surface finishing in foundries and fabrication shops.
Fit
⌀6 mm × 40 mm
Grit
24, 36, 46, 60, 80
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀10 × 32 mm
W179 cylindrical shape reference with a ⌀10 × 32 mm body on a 6 mm shank. Used for general-purpose grinding and controlled access work in toolrooms.
Fit
⌀6 mm × 40 mm
Grit
46, 60, 80, 120
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀7.5 × 25 mm
A5 round-nose cylindrical shape reference with a ⌀7.5 × 25 mm body. The rounded tip supports contour blending and die or mold finishing.
Fit
⌀6 mm × 40 mm
Grit
60, 80, 120, 180
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀22 × 50 mm
A11 mounted-point shape reference with a nominal ⌀22 × 50 mm abrasive body on a 6 mm shank. Used for edge grinding, deburring, contour work and weld dressing.
Fit
⌀6 mm × 40 mm
Grit
46, 60, 80, 120
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀13 × 19 mm
A24 bullet-shape reference with a ⌀13 × 19 mm body and rounded end, intended for blending radii on dies, weld toes and casting fillets.
Fit
⌀6 mm × 40 mm
Grit
46, 60, 80, 120
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀10 × 20 mm
A36 cone-shape reference with a ⌀10 mm base and 20 mm body length, intended for chamfering bores and internal deburring.
Fit
⌀6 mm × 40 mm
Grit
46, 60, 80
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀5 × 8 mm
B43 small cylindrical shape reference with a ⌀5 × 8 mm body on a 3 mm shank for restricted-access precision finishing.
Fit
⌀3 mm × 35 mm
Grit
120, 180, 220, 320
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀5 × 13 mm
Small B-series cylindrical mounted point with a longer abrasive body for controlled finishing inside narrow slots, grooves, miniature tools, and precision components.
Fit
⌀3 mm × 35 mm
Grit
120, 180, 220, 320
Abrasive
White Aluminum Oxide (WA)
Bond
Vitrified (V)
⌀25 × 50 mm
Long W-series cylindrical mounted point for blending flat faces, cleaning casting flash, and reaching deeper work areas where a wider contact face is useful.
Fit
⌀6 mm × 40 mm
Grit
24, 36, 46, 60
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
⌀3 × 10 mm
Compact round-nose mounted point for blending small radii, easing edges, and finishing narrow die cavities without leaving a sharp corner mark.
Fit
⌀3 mm × 35 mm
Grit
120, 180, 220, 320
Abrasive
White Aluminum Oxide (WA)
Bond
Vitrified (V)
⌀6 × 25 mm
Slim conical mounted point for chamfers, countersinks, internal corners, and narrow access areas where a cylindrical point cannot reach the feature cleanly.
Fit
⌀6 mm × 40 mm
Grit
46, 60, 80, 120
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
200 × 25 × 31.75 mm
Type 1 (straight) aluminum oxide bench grinding wheel reference for sharpening HSS tools, drills, and general workshop metal grinding on bench and pedestal grinders.
Fit
200 × 25 × 31.75 mm
Grit
36, 46, 60, 80
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
180 × 6 × 22.23 mm
Type 27 depressed-centre wheel reference for angle grinders. Fibre-reinforced resinoid-bond options are discussed for weld beads, structural steel, and stainless steel.
Fit
180 × 6 × 22.23 mm
Grit
24, 36, 46
Abrasive
Aluminum Oxide (A)
Bond
Resinoid (BF) — Fibre Reinforced
100 × 50 × 31.75 mm
Type 6 straight cup wheel reference for surface and tool-cutter grinders. Rim-face grinding can be discussed for sharpening milling cutters, broaches, and saw teeth.
Fit
100 × 50 × 31.75 mm
Grit
46, 60, 80, 120
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
115 × 1.6 × 22.23 mm
Type 41 ultra-thin reinforced cut-off wheel reference. A 1.6 mm thickness can be discussed for cutting steel, stainless steel, pipes, profiles and rebar.
Fit
115 × 1.6 × 22.23 mm
Grit
46, 60
Abrasive
Aluminum Oxide (A)
Bond
Resinoid (BF) — Fibre Reinforced
400 × 50 × 127 mm
Type 1 wheel reference for external cylindrical (OD) grinding of shafts, pins, and round components on production cylindrical grinders.
Fit
400 × 50 × 127 mm
Grit
46, 60, 80, 120
Abrasive
Aluminum Oxide (A)
Bond
Vitrified (V)
300 × 32 × 127 mm
Type 1 surface grinding wheel reference for reciprocating-table surface grinders and tool-steel or die-block applications.
Fit
300 × 32 × 127 mm
Grit
46, 60, 80, 100, 120
Abrasive
White Aluminum Oxide (WA)
Bond
Vitrified (V)
32 × 32 × 10 mm
Small-diameter Type 1 wheel reference for internal bore (ID) grinding. Quill-mounted applications should be confirmed by bore, speed, material and finish requirement.
Fit
32 × 32 × 10 mm
Grit
46, 60, 80, 120, 180
Abrasive
White Aluminum Oxide (WA)
Bond
Vitrified (V)
Send the shape, dimensions, grain, grit and quantity. We can quote standard products, oil stones, abrasive sticks and custom abrasive tools by RFQ.
Send Custom RFQ
