Industrial RFQ brochure
Sadhvi Udyog
Mounted Points and Grinding Wheel References
A practical buyer brochure for bonded abrasive mounted points, grinding-wheel RFQs, custom abrasive specifications and repeat industrial enquiry support.
Works Address
124, New Shiv Puri, Behind J.P. Public School, Aara Mill, Khurja - 203131, Uttar Pradesh, India
GST
09APXPM7548B1ZA
Document
Industrial catalogue / RFQ edition
Contact
info@sadhviudyog.com
A / W / B
Mounted point families
Cylinder, cone, bullet, round-nose and small-shank forms for die grinder work.
A / WA / PA / C
Abrasive grains
Aluminum oxide, white aluminum oxide, pink aluminum oxide and silicon carbide options.
Vitrified bond
Primary bond system
Porous bonded abrasive structure for form retention and controlled stock removal.
Custom RFQ
Special enquiry
Non-standard shapes, grit mixes, hardness and shank dimensions quoted on request.
Catalogue index
Brochure purpose
A Sadhvi Udyog RFQ guide for industrial abrasive buyers.
This brochure is built to help purchase teams, production engineers and maintenance shops discuss abrasive requirements clearly with Sadhvi Udyog. It explains what the company supplies, how product families fit common grinding work, and which details are needed before quotation.
What Sadhvi Udyog supplies
Vitrified mounted points are the primary manufactured range, supported by grinding-wheel, oil-stone, abrasive-stick and custom abrasive RFQ references.
How to use this brochure
Start with the application, shortlist the product family, then confirm shape, size, grain, grit, bond, speed marking and quantity before quotation.
What buyers should send
Share a shape code, drawing or sample with machine RPM, work material, operation, trial quantity and packing expectation for a clearer RFQ.
Company profile
Practical abrasive tools for repeat production grinding.
Sadhvi Udyog manufactures and supplies vitrified mounted points. Grinding wheel entries on this brochure are RFQ references for buyers who need to confirm shape, grit, bore, bond, speed marking and quantity before ordering.
Identity: Manufacturer and supplier of abrasive mounted points; grinding wheel and custom abrasive references quoted on request
Address: 124, New Shiv Puri, Behind J.P. Public School, Aara Mill, Khurja - 203131, Uttar Pradesh, India
GST: 09APXPM7548B1ZA
Mounted Points
Small bonded abrasive tools for die grinders, flexible shafts and precision hand-held grinding.
Grinding Wheels
Straight, bench, cup, internal and portable wheel references for RFQ discussion.
Custom Specifications
Non-standard sizes, grains, grades and packing can be discussed against material, machine and quantity.
Range at a glance
12
mounted-point SKUs listed
7
grinding wheel references
3 mm / 6 mm
common mounted-point shanks
24-320
typical grit coverage
Supply conversation starts with
Work material, machine speed, operation, shape code, body size, shank size, abrasive grain, grit, grade, bond and monthly consumption.
Capability matrix
Product fit by buyer requirement.
Use this matrix to move from search intent or shop-floor need to the specification details required for a useful RFQ.
| Buyer need | Product family | Specification focus | Typical use |
|---|---|---|---|
| Die grinder mounted points | A, B and W mounted-point families | Shape code, body diameter, body length, shank size, grit and bond | Bore cleanup, cavity finishing, deburring, radii blending and slot cleanup |
| Bench and pedestal grinding | Type 1 straight grinding wheel references | Wheel diameter, thickness, bore, abrasive grain, grit, grade and RPM | Tool sharpening, workshop grinding and maintenance support |
| Surface, cylindrical and internal grinding | Machine-specific grinding wheel references | Machine type, bore fit, contact area, coolant, work material and finish | Toolroom correction, production support and precision stock removal |
| Foundry and fabrication stock removal | Coarse mounted points and portable wheel references | Material, burr size, grinder RPM, removal rate, grit and quantity | Casting flash removal, fettling, weld dressing and edge preparation |
| Custom abrasive specifications | Mounted points, oil stones, abrasive sticks and wheel RFQs | Drawing or sample, grain, grit, grade, bond, minimum quantity and lead time | Non-standard access, repeat production references and special finishing work |
Product use domains
Where Sadhvi Udyog abrasives are used.
Each domain below shows the typical operation, matching product family and the reason that abrasive form is selected.
Die and mold manufacturing
Operation: Cavity blending, radii finishing, slot cleanup and edge breaking
Products used: A-series cones, A-series round-nose points and W-series cylinders
Small mounted points reach shaped cavities and controlled corners without overcutting.
Foundry and casting shops
Operation: Casting flash removal, gate cleanup, fettling and rough burr removal
Products used: Coarse W-series mounted points, silicon-carbide options and grinding wheel references
Coarser abrasives remove scale, casting marks and excess metal after shakeout.
Fabrication and welding units
Operation: Weld seam dressing, weld-toe blending, chamfer cleanup and edge preparation
Products used: A24 bullet points, W222 cylinders and Type 27 depressed-centre wheel references
The range supports both detail blending with mounted points and open-surface grinding.
Automotive component manufacturing
Operation: Part deburring, fixture cleanup, toolroom correction and repeat finishing
Products used: A / WA mounted points, straight-wheel, cup-wheel and internal-wheel references
Repeatable grit and shape choices help maintain consistent part-edge condition.
Toolrooms and maintenance departments
Operation: Bench grinding, sharpening, internal touch-up and repair grinding
Products used: Bench-wheel, cup-wheel and internal-wheel references, plus small B-series points
Daily maintenance teams need quick access to standard sizes and predictable stock removal.
Precision small-part finishing
Operation: Small bore finishing, miniature slot cleanup, jewelry and dental lab finishing
Products used: B43, B52, A1 and other 3 mm shank mounted points
Small shank mounted points allow controlled finishing in restricted-access work.
Selection guide
Choose by material, access and finish target.
Abrasive codes
Common grain options.
Aluminum oxide
General steel grinding and deburring
White aluminum oxide
Cooler cutting and sharper finish on hardened steels
Pink aluminum oxide
Controlled finishing where grain sharpness matters
Silicon carbide
Cast iron, non-ferrous and brittle material applications
Quality process
Batch confidence before dispatch.
- 1Abrasive grain, bond and required dimensions confirmed before quotation
- 2Specification reviewed against material, machine RPM and finish requirement
- 3Shape dressing and dimensional checks for OD, length, bore and shank fit
- 4Visual inspection and fit checks completed before packing where applicable
- 5Packing can include product code, grit, bond and safe-speed reference for repeat orders
Featured references
Representative catalogue products.
W222
Mounted Point W222
⌀25 × 25 mm
A11
Mounted Point A11
⌀22 × 50 mm
A24
Mounted Point A24
⌀13 × 19 mm
B43
Mounted Point B43
⌀5 × 8 mm
T1
Bench Grinding Wheel – Type 1
200 × 25 × 31.75 mm
T27
Depressed Centre Wheel – Type 27
180 × 6 × 22.23 mm
Professional selection path
Specify the abrasive before asking for price.
A reliable abrasive enquiry starts with the operation and machine, then moves to wheel or mounted-point geometry, abrasive grain, grit, grade, bond, safe-speed confirmation and quantity. This makes repeat orders easier and reduces back-and-forth for purchasing teams.
Application review
Confirm material, machine, access area, removal target and finish expectation.
Specification match
Select shape, abrasive grain, grit, grade, bond, shank or bore and safe-speed reference.
Quotation basis
Confirm quantity, packing, dispatch preference and any repeat-order reference.
Supply support
Use accepted quotation and product marking for repeatable future enquiries.
Safety and fit checks
Confirm machine RPM against product marking before use.
Use the correct guard, flange, shank overhang and mounting method.
Inspect every abrasive for cracks, damage or poor fit before mounting.
Use eye, face, hand and respiratory protection suitable for the operation.
Product tables
Standard range and RFQ-ready specifications.
Dimensions and safe speed must be confirmed against the machine, guard and work material before use.
Mounted Points
Shape-coded abrasive tools on steel shanks for compatible die grinders and flexible-shaft machines.
| Code | Product | Size | Abrasive / grit | Bond / speed | Primary use |
|---|---|---|---|---|---|
| W163 | Mounted Point W163 | ⌀6 × 13 mm | Aluminum Oxide (A) / White AO (WA) / 46, 60, 80, 120, 180 | Vitrified (V) / Confirm the maximum RPM on the quoted product marking; permitted speed changes with shank diameter and unsupported overhang. | Internal bore grinding, Deburring weld seams |
| W222 | Mounted Point W222 | ⌀25 × 25 mm | Aluminum Oxide (A) / Silicon Carbide (C) / 24, 36, 46, 60, 80 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Heavy stock removal, Face grinding |
| W179 | Mounted Point W179 | ⌀10 × 32 mm | Aluminum Oxide (A) / 46, 60, 80, 120 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | General grinding, Tool room work |
| A5 | Mounted Point A5 | ⌀7.5 × 25 mm | Aluminum Oxide (A) / Pink AO (PA) / 60, 80, 120, 180 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Contour blending, Die polishing |
| A11 | Mounted Point A11 | ⌀22 × 50 mm | Aluminum Oxide (A) / Silicon Carbide (C) / 46, 60, 80, 120 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Edge grinding, Deburring |
| A24 | Mounted Point A24 | ⌀13 × 19 mm | Aluminum Oxide (A) / 46, 60, 80, 120 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Weld toe blending, Fillet radius dressing |
| A36 | Mounted Point A36 | ⌀10 × 20 mm | Aluminum Oxide (A) / 46, 60, 80 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Chamfer grinding, Seat and chamfer touch-up |
| B43 | Mounted Point B43 | ⌀5 × 8 mm | Aluminum Oxide (A) / White AO (WA) / 120, 180, 220, 320 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Restricted-access finishing, Fine deburring |
| B52 | Mounted Point B52 | ⌀5 × 13 mm | White Aluminum Oxide (WA) / Pink AO (PA) / 120, 180, 220, 320 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Miniature die finishing, Small slot deburring |
| W221 | Mounted Point W221 | ⌀25 × 50 mm | Aluminum Oxide (A) / Silicon Carbide (C) / 24, 36, 46, 60 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Casting flash removal, Weld dressing |
| A1 | Mounted Point A1 | ⌀3 × 10 mm | White Aluminum Oxide (WA) / Pink AO (PA) / 120, 180, 220, 320 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Small radius blending, Fine mold cavity finishing |
| A39 | Mounted Point A39 | ⌀6 × 25 mm | Aluminum Oxide (A) / Silicon Carbide (C) / 46, 60, 80, 120 | Vitrified (V) / Confirm maximum RPM from the quoted product marking and permitted shank overhang before use. | Counter-sink finishing, Chamfer deburring |
Shape codes and dimensions are enquiry references. Final dimensions, shank, bond and rated speed are controlled by the accepted quotation, approved drawing and product marking.
Grinding Wheels
Bench, surface, cylindrical, internal, cup, depressed-centre and cut-off wheel references for RFQ discussion.
| Code | Product | Size | Abrasive / grit | Bond / speed | Primary use |
|---|---|---|---|---|---|
| T1 | Bench Grinding Wheel – Type 1 | 200 × 25 × 31.75 mm | Aluminum Oxide (A) / 36, 46, 60, 80 | Vitrified (V) / Confirm against supplied product label and applicable standard | HSS tool sharpening, Drill bit grinding |
| T27 | Depressed Centre Wheel – Type 27 | 180 × 6 × 22.23 mm | Aluminum Oxide (A) / Zirconia (Z) / 24, 36, 46 | Resinoid (BF) — Fibre Reinforced / Confirm against supplied product label and applicable standard | Weld bead grinding, Structural steel prep |
| T6 | Straight Cup Wheel – Type 6 | 100 × 50 × 31.75 mm | Aluminum Oxide (A) / White AO (WA) / 46, 60, 80, 120 | Vitrified (V) / Confirm on quoted product marking and machine setup | Tool & cutter grinding, Face grinding |
| T41 | Thin Cut-Off Wheel – Type 41 | 115 × 1.6 × 22.23 mm | Aluminum Oxide (A) / Zirconia (Z) / 46, 60 | Resinoid (BF) — Fibre Reinforced / Confirm against supplied product label and applicable standard | Steel cutting, Stainless steel cutting |
| Cyl | Cylindrical Grinding Wheel – Type 1 | 400 × 50 × 127 mm | Aluminum Oxide (A) / White AO (WA) / 46, 60, 80, 120 | Vitrified (V) / Confirm against supplied product label and applicable standard | OD shaft grinding, Pin grinding |
| Surf | Surface Grinding Wheel – Type 1 | 300 × 32 × 127 mm | White Aluminum Oxide (WA) / Pink AO (PA) / 46, 60, 80, 100, 120 | Vitrified (V) / Confirm against supplied product label and applicable standard | Flat surface grinding, Die block grinding |
| Int | Internal Grinding Wheel | 32 × 32 × 10 mm | White Aluminum Oxide (WA) / 46, 60, 80, 120, 180 | Vitrified (V) / Confirm against supplied product label and applicable standard | Bearing race ID grinding, Small bore finishing |
Shape codes and dimensions are enquiry references. Final dimensions, shank, bond and rated speed are controlled by the accepted quotation, approved drawing and product marking.
RFQ checklist
Details required for an accurate quote.
Contact
Sadhvi Udyog
Mounted point manufacture and abrasive RFQ support
Email: info@sadhviudyog.com
Address: 124, New Shiv Puri, Behind J.P. Public School, Aara Mill, Khurja - 203131, Uttar Pradesh, India
GST: 09APXPM7548B1ZA
Hours: Mon-Sat, 9 AM - 6 PM IST
Manufacturing process
From application review to packed abrasive supply.
The manufacturing and supply flow is built around application fit, abrasive selection, geometry confirmation and buyer communication before supply.
Step 1
Application and specification review
Every product starts with the required shape, dimensions, work material, machine RPM and finish target so the abrasive selection is tied to the actual job.
Step 2
Grain, grit and bond selection
Abrasive grain, grit size, grade and bond are aligned to stock removal, finish expectation and operating conditions before the order is confirmed.
Step 3
Product confirmation and finishing
Mounted points and quoted wheel references are confirmed against the agreed geometry, shank or bore requirement, and practical production use before dispatch.
Step 4
Inspection, marking and packing
Dimensions, fit, rated-speed guidance and batch-ready packing details are checked so repeat buyers receive clearer, more reliable supply.
Buyer trust
How buyers can evaluate Sadhvi Udyog with confidence.
Trust comes from repeatable process, visible checkpoints and better specification control, not from broad claims alone.
Specification-first supply
The order is not treated as a generic abrasive item. Shape code, size, grit, bond and application are confirmed before supply moves forward.
Visible quality checkpoints
Dimensional checks, safe-speed confirmation and packing references create a more dependable handover for industrial buyers.
Clear repeat-order reference
Documented product notes and batch-linked communication make it easier to repeat a successful abrasive choice instead of starting from zero.
Industrial-use orientation
The site, brochure and RFQ flow are built around die shops, foundries, fabrication units, toolrooms and component manufacturers, not generic retail messaging.
Catalogue principles
How this brochure is organized for buyers.
Product family first
Separate mounted points, grinding wheel references and custom specifications so buyers can reach the right technical table quickly.
Application language
Describe the operation in shop-floor terms such as deburring, fettling, bore cleanup, tool grinding and surface finishing.
RFQ-ready data
Show shape, size, grain, grit, bond and machine details so purchasing and production teams can compare options.
Material and machine fit
Guide selection by work material, access area, machine type, finish requirement and expected stock removal.
Safety confirmation
Keep speed, guard and mounting checks visible because final safe use depends on the tool, machine and operating setup.